lite-on dcc release lite-on technology corp. / optoelectronics no.90,chien 1 road, chung ho, new taipei city 23585, taiwan, r.o.c. tel: 886-2-2222-6181 fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto led displayproduct data sheetLTS-10101TBE spec no.: ds30-2010-0161effective date: 07/20/2013revision: a bns-od-fc001/a4 bns-od-fc001/a4 bns-od-fc001/a4 bns-od-fc001/a4
lite - on technology corporati on property of lite - on only part no.: lts - 10101tbe page: 1 of 5 bns - od - c131/a4 features 1.0 inch ( 25.40 mm) digit height. continuous uniform segments. low power requirement. excellent characters appearance. high brightness & high contrast. wide viewing angle. solid state reliability. categorized for luminous intensity. lead - free pac kage (according to rohs) description the lts - 10101 tbe is a 1.0 inch ( 25.40 mm) digit height single digit seven - segment display. this device utilizes ingan blue chips , which are made from ingan on sapphire substrate, and has a gray face and white segments. device part no. description ingan b lue universal lts - 10101 tbe
lite - on technology corporati on property of lite - on only part no.: lts - 10101tbe page: 2 of 5 bns - od - c131/a4 package dimensions notes: 1. all dimensions are in millimeters. tolerances are ? 0.25 mm (0.01) unless otherwise noted. 2. pin tips shift tolerance is + 0.4 mm. internal circuit diagram
lite - on technology corporati on property of lite - on only part no.: lts - 10101tbe page: 3 of 5 bns - od - c131/a4 pin connection no. connection 1 anode a,d 2 anode e 3 anode b,c 4 cathode b,c 5 cathode e 6 cathode a,d
lite - on technology corporati on property of lite - on only part no.: lts - 10101tbe page: 4 of 5 bns - od - c131/a4 absolute maximum rating at ta=25 o c parameter maximum rating unit power dissipation per chip 334 mw peak forward current per chip ( 1/10 duty cycle, 0.1ms pulse width ) 10 0 ma continuous forward current per chip 2 0 ma derating linear f rom 25 per chip 0. 22 ma/ operating temperature range - 35 to + 8 5 storage temperature range - 35 to + 8 5 solder temperature: max 260 for max 3sec at 1.6mm[1/16inch] below seating plane. electrical / optical characteristics at ta=25 o c parameter symbol min. typ. max. unit test condition average luminous intensity per segment i v 17.4 54.9 m cd i f =1 0 ma peak emission wavelength ? p 468 nm i f =20ma spectral line half - width ? ? 25 nm i f =20ma dominant wavelength ? d 470 nm i f =20ma forward voltage per segmen t v f 1 3. 2 14.4 v i f =20ma reverse current per segment i r 100 ? a v r =5v luminous intensity matching ratio i v - m 2:1 i f =1ma note: 1. luminous intensity is measured with a light sensor and filter combination that approximates the cie (commision intern ationale de leclairage) eye - response curve. 2. reverse voltage is only for ir test. it can not continue to operate at this situation. esd (electrostatic discharge) static electricity or power surge will damage the led. suggestions to prevent esd damage: ? use of a conductive wrist band or anti - electrostatic glove when handling these leds. ? all devices, equipment, and machinery must be properly grounded. ? work tables, storage racks, etc. should be properly grounded. ? use ion blower to neutralize the static char ge which might have built up on surface of the leds plastic lens as a result of friction between leds during storage and handling.
lite - on technology corporati on property of lite - on only part no.: lts - 10101tbe page: 5 of 5 bns - od - c131/a4 typical electrical / optical characteristic curves (25 o c ambient temperature unless otherwise noted)
|
